The new Pocket Pump TOUCH personal air sample pump provides low flows from 20 to 500 ml/min for gas and vapor sampling. Pocket Pump TOUCH features touch screen operation that feels like your cell phone, Bluetooth connectivity to PC and DataTrac Pro Software, powerful Li-Ion battery for 20-hour run times, exhaust port for bag sampling, USB charging, and more in a miniature pump that fits in your pocket. Pocket Pump TOUCH is UL Listed for intrinsic safety.
Features
- Intuitive touch screen for easy programmability
- Constant flows from 20 to 500 ml/min
- Accommodates typical flow rates for sorbent tubes
- Bluetooth communication with PC and DataTrac Pro Software
- Exhaust port for direct filling of sample bags
- Optional quick-connect accessory for easy connection
- Magnetic charging connector
- Constant battery status display
- Time, date, battery status, flow rate, sample volume, temperature, atmospheric pressure, remaining run time (programmed run), and
elapsed run time displayed on large backlit screen
- Rubber overmolding on case provides quiet operation, impact protection, and a no-slip grip
- Compact and only 8.3 ounces (235 grams)
- > 20+ hour run times at 500 ml/min with powerful Li-Ion battery
- Auto-dim feature conserves battery
- Extended run times with AC adapter/charger
- Multi-tube sampling
- Sample with up to four tubes simultaneously; saves time and uses fewer pumps
- Constant flow and pressure modes
- Automatic flow fault and restart
- Screen auto-lock provides for secure sampling
Specifications
Performance Profile
Flow Range in Constant Flow Mode
|
20 to 500 ml/min
|
Compensation Range in Constant Flow Mode
|
20 to 500 ml/min up to 20 inches water back pressure
|
Pressure Range in Constant Pressure Mode
|
1 to 20 inches water |
Flow Control System
|
Corrects for changes in back pressure, temperature, and atmospheric pressure
|
Power
|
Removable rechargeable lithium-ion (Li-Ion) battery, 3.6 V, 2.6 Ah, 9.36 Wh or USB charger
|
Run Time (Li-Ion)
|
20+ hrs at 500 ml/min up to 20 inches water back pressure, extended run times available with charger
Tested using 37-mm 0.8μ m MCE filter with new pump and battery. Pump performance may vary. |
Charging Time
(varies with battery capacity and level of discharge)
|
< 10 hrs (< 4.5 hrs to 80%) |
Accuracy
|
Constant flow control: ± 5% of set-point or ± 3 ml/min, whichever is higher
Atmospheric pressure: ± 0.3 in Hg
Temperature: ± 1.0 C
Real-time clock: ± 1%
Constant pressure mode: Reading ± 0.5 inch water |
Temperature Ranges
|
Operating: 32 to 113 F (0 to 45 C)
Charging: 32 to 113 F (0 to 45 C)
Storage: -4 to 113 F (-20 to 45 C)
|
Humidity Range
|
< 95% RH, non-condensing
|
Altitude
|
Corrects ?ow for changes in temperature (32 to 113 F [0 to 45 C]) and ambient pressure up to 15,000 feet (4,572 meters) above and down to 2,300 feet (701 meters) below sea level |
Flow Fault
|
After 3 seconds of restricted flow, pump stops running, elapsed time continues, status LEDs flash red, and pump displays fault icon. After 5 seconds in fault, auto-restart is attempted every 5 seconds up to 5 times unless full airflow is restored prior to that. If full airflow is not corrected within 25 seconds, the pump ends the run and displays Sample Summary. |
Display Type/Parameters
|
High-contrast backlit LCD/Time, date, battery status, flow rate, sample volume, temperature, atmospheric pressure, back pressure, programmed run remaining time, and elapsed run time
|
User Interface
|
Eight-area capacitive touch screen with auto-dim and locking options
|
Dimensions
|
3.2 x 3.8 x 1.5 in (8.1 x 9.7 x 3.8 cm)
|
Weight |
8.3 oz (235 gm)
|
Certifications/Markings
|
|
Case Material
|
IP 64-rated case, polycarbonate with rubberized anti-static overmolding
|
Communications with PC
|
Low-energy Bluetooth, requires DataTrac Pro for Pocket Pump TOUCH USB Bluetooth Adapter (Cat. No. 877-94)
|
Tubing
|
Requires 1/4-in ID tubing |
Pumps
Pocket Pump TOUCH
Includes pump with Li-Ion battery; Requires charger. |
220-1000TC |
Pocket Pump TOUCH with Charger
Includes pump and single charger |
220-1000TC-C |
Kits
Pocket Pump TOUCH 3-pack Kit
Includes 3 each: pumps, chargers, and Type A single tube holders, in a Pelican case |
220-1000TC-K3 |
Pocket Pump TOUCH 5-pack Kit
Includes 5 each: pumps, chargers, and Type A single tube holders, in a Pelican case |
220-1000TC-K5 |
Pocket Pump TOUCH Deluxe 5-pack Kit
Includes 5 each pumps, Type A single tube holders, and USB chargers, one 5-port USB charging hub with power cable (U.S. plug), and one DataTrac Pro USB Bluetooth adapter, in a Pelican case |
220-1000TC-K5D |
Pocket Pump TOUCH Single Kit
Includes pump, single charger, and Type A single tube holder, in a soft-sided nylon carry case |
220-1000TC-K |
Pocket Pump TOUCH Starter Kit
Includes pump, single charger, 3 feet (0.9 meter) of Tygon tubing, and collar clip with cable tie |
220-1000TC-S |
Accessories
DataTrac Pro for Pocket Pump TOUCH
Includes USB Bluetooth adapter; software download available |
877-94 |
Pocket Pump TOUCH 5-port USB Hub
Includes hub and power cable (U.S. plug), accommodates up to 5 USB chargers |
220-400 |
Pocket Pump TOUCH Bag Sampling Adapter
Quick-connect adapter installs on pump exhaust port for secure connection to tubing for bag sampling |
220-200 |
Pocket Pump TOUCH Charger
Includes USB charger with power adapter (wall cube) |
220-300 |
Pocket Pump TOUCH Replacement Battery Pack
Li-Ion Battery Pack for use with Pocket Pump TOUCH only |
P76303 |
Single Kit Case, Nylon, for All SKC Single Pump Kits and for the PowerFlex 5-station Battery Charger
Nylon Single Kit Carry Case, for all SKC Single Pump Kits and for the PowerFlex 5-station battery charger, includes a padded shoulder strap and compartment for cables |
224-903 |