Features
Advanced Technology in the Smallest Programmable Low Flow Pump
Constant flows from 20 to 225 ml/min 
- Accommodates typical flow rates for sorbent tubes
- Model available with twin ports for bag sampling
Compact and lightweight
- Only 4.5 x 2.2 x 1.4 inches (11.4 x 5.6 x 3.6cm) and 5 ounces (142 grams)
- Easily fits a shirt pocket or clips on a belt
Advanced technology with manual and PC compatibility
Ultra-quiet operation
- For greater worker acceptance
Save time and use fewer pumps with multiple-tube sampling
- Sample with up to 4 tubes simultaneously; select from two pump modes:
- Constant flow mode, requires multiple-tube low flow holder and CPC
- Constant pressure mode, requires multiple-tube low flow holder only
PC programmable with DataTrac Software
- Program delayed start, timed run, or multiple sampling schedules
- Download sampling data to a PC for record keeping and data analysis
No tools required
- Simple 3-button keypad does it all
Continuous sample volume calculations
- All sampling parameters are continuously updated
Automatic features maintain sample integrity
- Low battery and restricted flow shut off
- Pump stores run time data in memory
- Auto-restart attempted after flow fault
RFI/EMI-shielded and CE marked
- Flow unaffected by outside interferences
- Accurate air volumes and data validity ensured
Large easy-to-read LCD
- Displays sampling parameters, battery status, and flow fault at the touch of a button
Smart charging
- Built-in system automatically senses maximum charge and switches to trickle charge to prolong battery life and prevent damage
Continuous run with AC adapter for extended sampling
- Useful for environmental monitoring or 24-hour sampling without harm to the battery pack
Constant battery status display
- View battery status before, during, and after sampling
Security code protects data
Impact-resistant case
- Rugged case withstands rough handling in the industrial workplace
Intrinsically safe
- UL and cUL Listed
- Model available that meets ATEX Directive 94/9/EC (NiCad battery model only)
- Safe in hazardous locations
- Versatile for all industries
Specifications
Performance Profile
Flow Range in Constant Flow Mode
|
20 to 225 ml/min
|
Accuracy Variance Between LCD Reading and Actual Flow Rate (after calibration)
|
20 to 225 ml/min ± 5%
|
Constant Flow Compensation Range (inlet only)
|
20 to 225 ml/min up to 20 inches water back pressure
|
Flow Control Accuracy
|
± 5% of set-point in constant flow after calibration |
Pressure Range in Constant Pressure (Multiple-tube Sampling) Mode (inlet only)
|
1 to 10 inches of water (1.87 to 18.7 mm Hg) at a maximum flow rate of 200 ml/min for 8 hrs (12 hrs if using NiMH battery) 10 to 20 inches water (18.7 to 37.4 mm Hg) at maximum flow rate of 100 ml/min for 8 hrs (12 hrs if using NiMH battery)
|
Constant Pressure (Multiple-tube Sampling) Mode Accuracy
|
Pressure reading ± 0.5 in of water (0.25 mm Hg)
|
Operating Temperature
|
32 to 104 F (0 to 40 C)
|
Storage Temperature
|
-4 to 113 F (-20 to 45 C)
|
Charging Temperature
|
40 to 100 F (5 to 38 C)
|
Operating Humidity |
0 to 95% non-condensing |
Tubing |
Requires 1/4-inch ID tubing |
Run Time
|
With NiMH: 12 hours at 200 ml/min and 10 inches water back pressure, 12 hours at 100 ml/min up to 20 inches water back pressure Run time is 8 hrs at either setting if using NiCad battery
Varies with flow rate and sampling media in line Using a charger with AC power: Extend run time
|
Timer Display Range
|
1 to 9999 minutes
|
Timing Accuracy
|
± 1%
|
Flow Fault
|
If the pump is unable to compensate for longer than 15 seconds due to excessive back pressure, the pump enters FLOW FAULT mode. The pump goes into HOLD, the fault icon appears on the display, and the accumulated run time display is frozen and retained. After 5 minutes in flow fault, auto-restart is attempted every 5 minutes until flow is corrected.
|
Battery Pack
|
Rechargeable NiCad battery pack, 2.4 V x 0.6 Ah or Rechargeable NiMH battery pack, 2.4 V x 1.0 Ah
|
Charge Time (varies with battery capacity and level of discharge) |
< 6 hrs with Pocket Pump charger (battery attached to pump) Approximately 16 hrs with charger (battery detached from pump)
|
Battery Charge Level Indicator
|
Icon displayed at full, mid, and low charge |
Weight
|
5 oz (142 gm)
|
Dimensions
|
4.5 x 2.2 x 1.4 in (11.4 x 5.6 x 3.6 cm)
|
Case
|
Impact-resistant stainless steel with ABS/polycarbonate
|
Intrinsically Safe
|
UL and cUL Listed
|
RFI/EMI Shielding
|
RFI/EMI-shielded case CE marked Model 210-1002TX is ATEX approved (NiCad battery model only). Contact SKC.
|
Protect sample pump from weather when in use outdoors.
Pumps
Pocket Pump with Charger Pocket Pump® programmable low flow personal sample pump with NiMH battery and 115 V single charger Flow range: 20 to 225 ml/min |
210-1000MH |
Pocket Pump Sample Pump with Single Charger Pocket Pump® programmable low flow personal sample pump, with NiMH battery and 230 V single charger Flow range: 20 to 225 ml/min |
210-1001MH |
Pocket Pump Sample Pump (charger not included) Pocket Pump only, low flow personal programmable sample pump, with NiMH battery (charger not included) Flow range: 20 to 225 ml/min |
210-1002MH |
Kits
Pocket Pump 5-pack Sample Pump Kit 5-pack Pocket Pump® Kit with five each: programmable Pocket Pumps with NiMH battery, Type A tube holders, and one 5-station charger (115 V), and carry case Flow range: 20 to 225 ml/min |
210-1000MH5D |
Pocket Pump Single Sample Pump Kit Single Pocket Pump® Kit with programmable pump, NiMH battery, 115 V single charger, Type A tube holder, and carry case Flow range: 20 to 225 ml/min |
210-1000MHK |
Pocket Pump 5-pack Sample Pump Kit 5-pack Pocket Pump® Kit with five each: programmable Pocket Pumps with NiMH battery, 115 V single chargers, Type A tube holders, and carry case Flow range: 20 to 225 ml/min |
210-1000MHK5 |
Pocket Pump Single Sample Pump Kit Single Pocket Pump® Kit with programmable Pocket Pump, NiMH battery, 115 V single charger, Type A tube holder, and Pelican carry case Flow range: 20 to 225 ml/min |
210-1000MHKH |
Pocket Pump Sample Pump Starter Kit Pocket Pump® Starter Kit, programmable low flow personal sample pump, with NiMH battery, 115 V charger, Tygon tubing (3 feet, 1/4-inch ID), and collar clip with cable tie Flow range: 20 to 225 ml/min UL approved for intrinsic safety |
210-1000MH-S |
Pocket Pump 5-pack Sample Pump Kit 5-pack Pocket Pump Kit with five each: programmable Pocket Pumps with NiMH battery, Type A tube holders, and one 5-station charger (230 V), and carry case Flow range: 20 to 225 ml/min |
210-1001MH5D |
Pocket Pump Single Sample Pump Kit Single Pocket Pump Kit with programmable Pocket Pump, NiMH battery, 230 V single charger, Type A tube holder, and carry case Flow range: 20 to 225 ml/min |
210-1001MHK |
Pocket Pump 5-pack Sample Pump Kit 5-pack Pocket Pump Kit with five each: programmable Pocket Pumps with NiMH battery, 230 V single chargers, Type A tube holders, and carry case Flow range: 20 to 225 ml/min |
210-1001MHK5 |
Pocket Pump Single Sample Pump Kit Single Pocket Pump Kit with programmable pump, NiMH battery, 230 V single charger, Type A tube holder, and Pelican carry case Flow range: 20 to 225 ml/min |
210-1001MHKH |
Pocket Pump Sample Pump Starter Kit Pocket Pump Starter Kit, low flow programmable personal sample pump, with NiMH battery, 230 V charger, Tygon tubing (3 feet, 1/4-inch ID), and collar clip with cable tie Flow range: 20 to 225 ml/min UL approved for intrinsic safety |
210-1001MH-S |
Accessories
5-pack Pump Kit Case, Deluxe, for Pocket Pump with Multi-charger 5-pack Pelican Pump Carry Case, for Pocket Pump with Multi-charger; on wheels for easy transport, watertight, airtight, dustproof, and crushproof, equipped with foam for complete equipment protection; will accommodate five pumps with accessories |
210-88 |
5-station Multi-charger, for Pocket Pump, NiMH/NiCad NiMH/NiCad 5-station Multi-charger, for Pocket Pump, NiMH/NiCad, 115 V only |
223-427 |
DataTrac Software, for Pocket Pump DataTrac Software, for Pocket Pump, includes programming and datalogging softwareon CD and USB cable. |
877-90 |
Low Flow Constant Pressure Controller (CPC) Low Flow Constant Pressure Controller (CPC), for Pocket Pump sample pumps; use CPC with an Adjustable Low Flow Tube Holder |
224-26CPC-10 |
Multi-charger, 5-station, 100-240 V, for UL Listed Pumps, with U.S. Plug Multi-charger, 5-station, 100-240 V, for UL Listed pumps, with U.S. plug |
223-107A |
Pocket Pump Single Charger, 100-240 V, for UL Listed and ATEX pumps Single Charger, 100-240 V, for UL Listed and ATEX pumps, with multi-plug |
223-229A |
Pocket Pump Single Charger, 115 V Single Charger, for Pocket Pump, 115 V, suitable for charging both NiCad and NiMH batteries |
223-228 |
Pump Case, Deluxe, for 5-pack Pocket Pump or 222 Series Pump Kits with Single Chargers 5-pack Pump Carry Case, Pelican, for Pocket Pump or 222 Series pumps with single battery chargers; on wheels for easy transport, watertight, airtight, dustproof, and crushproof, equipped with foam for complete equipment protection; will accommodate five pumps and accessories |
224-909 |
Replacement NiMH Battery Pack, for Pocket Pump UL Listed Model Replacement NiMH Battery Pack, for Pocket Pump UL Listed model |
P20129-2 |
Tygon Tubing Tygon Tubing, 1/4-inch ID x 3/8-inch OD,fits over impinger side arm, impinger inlet, filter cassette outlet, or Luer adapter. 50 feet |
225-1345 |