The patented Sioutas Cascade Impactor separates and collects ultrafine, fine, and > 2.5-micron airborne particles (five size ranges including > 2.5, 1.0 to 2.5, 0.50 to 1.0, 0.25 to 0.50, and < 0.25 micron. Particles above each cut-point are collected on a 25-mm PTFE filter in each appropriate stage when the Sioutas Impactor is used with a 9 L/min sample pump. Particles less than the 0.25-micron cut-point of the last stage are collected on a 37-mm PTFE after-filter. The Sioutas Impactor is suitable for personal and area sampling indoors and may be used for ambient outdoor sampling with special provisions. Size-fractionated samples can be analyzed gravimetrically, chemically, and microscopically.
Features
- Precise particle separation
- Particle size cut-points: 2.5 µm, 1.0 µm, 0.50 µm,
and 0.25 µm
- The only personal impactor that efficiently samples
Ultrafine, Fine, and > 2.5 µm particles simultaneously
- Maintains high collection efficiency even at high particle concentrations
- Optimized at 9 L/min flow rate with low pressure drop for 24-hour sampling
- Improves analytical sensitivity
- Minimizes non-detectable samples
- Preserves unstable compounds
- Chemically inert collection substrate
- No impaction grease to contaminate sample
- Minimal particle bounce and internal wall losses
- Suitable for indoor and outdoor* sampling
- Size-fractionated samples can be analyzed gravimetrically, chemically, and microscopically
- Small and lightweight
- Suitable for personal or area sampling
Specifications
Performance Profile
Flow Rate |
9 L/min
50% cut-point of each stage at 9 L/min
Stage A: 2.5 µm
Stage B: 1.0 µm
Stage C: 0.50 µm
Stage D: 0.25 µm |
Recommended After-filter Type |
37-mm, 2.0-µm PTFE filter•†
(Cat. No. 225-1709)
|
Recommended Collection Filter for Stages |
25-mm, 0.5-µm PTFE with laminated PTFE support
(Cat. No. 225-2708)•
|
Wind Velocity |
< 5 mph |
Operating Temperature |
Maximum operating temperature of PTFE Filters with the PMP support ring is 464 F (240 C) |
Maximum Particle Load |
Varies per stage ‡ |
Construction Material |
Stages are anodized aluminum;
O-rings are Buna-N (Nitrile); filter retainers are acrylic |
Inlet and Outlet Diameters |
Inlet: 3/8-in OD and 1/4-in ID
Outlet: 3/8-in OD and 1/4-in ID |
Dimensions |
3.4 x 2.2 in (8.6 x 5.5 cm) |
Weight |
5.6 oz (159 gm) |
Tubing |
3/8-inch ID |
Approvals |
ETV |
Order
Description |
Cat. No. |
Sioutas Five-stage Cascade Impactor
Sioutas Cascade Impactor, for use with Leland Legacy air sampling pump at 9 L/min; separates and collects airborne particles in five size ranges: > 2.5 µm, 1.0 to 2.5 µm, 0.50 to 1.0 µm, 0.25 to 0.50 µm, and < 0.25 µm |
225-370 |
Replacement Filter Retainer, for Sioutas Impactor
Replacement Filter Retainer, for Sioutas Impactor, pk/4 |
P20151 |
Replacement Collector Plates Kit, for Sioutas Impactor
Replacement Collector Plates Kit, for Sioutas Impactor, includes set of 4 plates |
P55016 |
Accessories
Description |
Cat. No. |
Leland Legacy Personal Sample Pump
Leland Legacy® Pump only (programmable) with Li-Ion battery (charger not included) Flow range: Constant flow 5 to 15 L/min CE marked to meet European CE Directive Not intrinsically safe |
100-3002 |
Noise-reducing Nylon Pump Pouch, Black, for Leland Legacy Pump
Noise-reducing Nylon Pump Pouch, for single Leland Legacy pump, black, with lining to reduce pump noise from 62.5 to 52 dB, includes waist belt and shoulder strap |
224-89 |
PTFE Filters, 0.5 µm, 25 mm
PTFE Filter with laminated PTFE support, 0.5 µm, 25 mm, no support pad included, pk/100 |
225-2708 |
PTFE Filters, 2.0 µm, 37 mm
PTFE Filter with PMP support ring, 2.0 µm, 37 mm, no support pad included, pk/50 |
225-1709 |
Tygon Tubing
Tygon Tubing, 3/8-inch ID, for QuickTake Series sampling pumps, 10 feet |
225-1351 |