The Grab Air fixed flow (1 L/min) economical area sample pump uses a 9-volt alkaline battery for sampling gases/vapors. The pump is ideal for use with sample bags.
Not UL Listed for intrinsic safety
Features
- Uses 9-volt alkaline battery — no down time for battery charging
- Low-battery indicator
- Fixed 1 L/min flow rate
- Approximately 1000 liters volume on one battery
- Minimum setup time — simply attach a bag and sample
Specifications
Performance Profile
| Flow Rate |
Approx. 1 L/min |
| Operation Time |
Approx. 1000 liters volume per battery dependent on battery quality |
| Battery |
Disposable 9-V alkaline |
| Pumping Action |
Diaphragm |
| Case |
Sturdy, lightweight plastic |
| Intrinsic Safety |
Not intended for use in explosive or hazardous locations |
| Dimensions |
4.25 x 2.5 x 1.1 inches (10.8 x 6.3 x 2.7 cm) |
| Weight |
6.6 ounces (186 grams) |
Protect sample pump from weather when in use outdoors.
Pumps
Grab Air Sample Pump
Grab Air Bag Sampling Pump with 9-volt alkaline battery; designed to fill sample bags at 1 L/min and collects approximately 1000 liters volume on one battery
Recommended for use with sample bags up to 10-liter size
Note: Not intended for use in explosive or hazardous environments |
222-2301 |
Kits
Grab Air Sample Pump Hazmat Kit
Grab Air Hazmat Kit includes pump, 9-volt alkaline battery, 3 feet of 3/16-inch ID PTFE tubing, and ten 1-liter Tedlar bags with single polypropylene fitting Cat. No. 232-01
Use in non-explosive environments only.
Not UL Listed for intrinsic safety; not CE marked |
222-2111 |
Accessories
PTFE Tubing, 3/16-inch ID x 1/4-inch OD, for Use with Sample Bags
PTFE Tubing, 3/16-inch ID x 1/4-inch OD, for use with sample bags; tubing fits over bag fitting, 10 feet |
231-9-23 |
Tedlar Sample Bags, 1 Liter, Single Polypropylene Fitting
Tedlar® 1-liter Sample Bag with single polypropylene septum fitting which combines the hose/valve and the septum holder into one compact fitting; for use with small Vac-U-Chamber Cat. No. 231-940, pk/10 |
232-01 |
