Wednesday, 19 December 2018

Sorbent Tube Sampling Accessories

 

Sorbent Tube Sample Train

SKC offer a range of gas and vapour sampling accessories to complement the range of air sampling pumps.

 

The following table identifies which accessories are suitable for use with which SKC sampling pump.

Sample Pump Constant Pressure Controller (CPC) Adjustable Flow Tube Holder Low Flow Adaptor Kit
AirChek 2000
AirChek 3000
224-26-CPC 224-26-01 (1 tube)
224-26-02 (2 tubes)
224-26-03 (3 tubes)
224-26-04 (4 tubes)
210-500
AirChek 52
Sidekick
224-26-CPC 224-26-01 (1 tube)
224-26-02 (2 tubes)
224-26-03 (3 tubes)
224-26-04 (4 tubes)
210-500
AirLite 224-26CPC-10 224-26-01 (1 tube)
224-26-02 (2 tubes)
224-26-03 (3 tubes)
224-26-04 (4 tubes)
110-500
Universal Not required* 224-26-01 (1 tube)
224-26-02 (2 tubes)
224-26-03 (3 tubes)
224-26-04 (4 tubes)
N/A
AirChek XR5000 224-26-CPC 224-26-01 (1 tube)
224-26-02 (2 tubes)
224-26-03 (3 tubes)
224-26-04 (4 tubes)
210-500
Pocket Pump 224-26CPC-10 222-3-1     (1 tube type A) †
222-3L-1   (1 tube type B) †
222-3XL-1 (1 tube type C) †
222-3XD-1 (1 tube type D) †
224-26-02 (2 tubes)
224-26-03 (3 tubes)
224-26-04 (4 tubes)
N/A
AirChek Touch 224-26-CPC 224-26-01 (1 tube)
224-26-02 (2 tubes)
224-26-03 (3 tubes)
224-26-04 (4 tubes)
210-500

‡ includes Adjustable Low Flow Single Tube Holder, CPC and Protective Tube Cover Type A
* Note that the Universal series of air sampling pumps do not require a CPC as they have an internal adjustment (regulator) for low flow sampling
† Single tube holder is not flow adjustable

 

Constant Pressure Controller (CPC)

Constant Pressure Controller CPC

A device which allows a sampling pump to operate at low flow rates and with the optional adjustable low flow tube holders. The CPC is placed inline between the adjustable low flow tube holder and the pump inlet, and regulates the specific amount of pressure to be maintained across the needle valve(s) on the supply (pressure) end of the sampling train. During sampling a valve inside the CPC opens and pulls additional air into the train on the pump (vacuum) end of the CPC as needed, to maintain the CPC-specified pressure across the needle valve(s).

Description Part Number
CPC for AirChek 3000, Sidekick, AirChek XR5000 pumps 224-26-CPC
CPC for AirLite and PocketPump* pumps 224-26CPC-10

 * Not required in using a single adjustable low flow tube holder with a PocketPump

 

 

Adjustable Low Flow Tube Holders

These products enable a sampling pump to be used with up to 4 sorbent tubes at the same time, either the same tube type running at different flow rates, or with different tubes running at the same or different flow rates.

Description Number of Tubes Part Number
Single adjustable flow tube holder 1 224-26-01
Double adjustable flow tube holder 2 224-26-02
Triple adjustable flow tube holder 3 224-26-03
Quadruple adjustable flow tube holder 4 224-26-04

 

Single Adjustable Flow Tube Holder

224-26-01

 Dual Adjustable Flow Tube Holder

224-26-02

Triple Adjustable Flow Tube Holder

224-26-03

Quad Adjustable Flow Tube Holder

224-26-04

 

 

Protective Tube Covers

These protect the ends of the tube for storage and transit. The appropriate tube cover must be selected by matching the Tube Cover letter in the table with the Tube Selection Charts. Note that tube covers Types A to D are for use with SKC Adjustable Low Flow Tube Holders only. Collar clips are attached for convenience.

Tube Cover Description Part Number
A 6 mm OD x 70 mm L 224-29A
B 8 mm OD x 110 mm L 224-29B
C 10 mm OD x 150 mm L 224-29C
D 10 mm OD x 220 mm L 224-29D
V OVS Tubes* (do not use an adjustable low flow holder) 224-29V
P Low-volume PUF** (do not use an adjustable low flow holder) 224-29P

* OSHA Versatile Sampler (OVS) tubes are typically used at a flow rate of 1 L/min provided by a personal sample pump. The special OVS tube holder is designed to accommodate the 13 mm diameter of SKC OVS tubes, provide a convenient clip to attach the tube in the breathing zone, and protect the tube during sampling. Includes 0.9 m (3ft) of tubing.

** Low-volume PUF tubes are typically used at a flow rate of 1 to 5 L/min provided by a personal sample pump. Therefore, a special tube holder is used in place of an adjustable low flow holder that only allows flows to 500 ml/min. The low-volume PUF tube holder is also specially designed to accommodate the large 22 mm diameter and long 100 mm length of SKC low-volume PUF tubes. Includes 0.9 m (3ft) of tubing.

 

Sorbent Tube Cover

224-29A/B

Sorbent Tube Cover

224-29C

Sorbent Tube Cover

224-29D

OVS Tube Holder

224-29V

PUF Tube Holder

224-29P

 

Low Flow Tube Covers with a Non-Adjustable Tube Holder

Tube Cover Description Part Number
A Standard tubes 6 mm OD x 70 mm length 222-3-1
B Tubes 7 or 8 mm OD x 110 mm length 222-3L-1
C Tubes 10 mm OD x 150 mm length 222-3XL-1
D Tubes 10 mm OD x 220 mm length and shorter tubes 222-3XD-1

 

Type A Protective Tube Cover

222-3-1

Type B Protective Tube Cover

222-3L-1

Type C Protective Tube Cover

222-3XL-1

Type D Protective Tube Cover

222-3XD-1

 

Tube Breakers

Description Part Number
Breaker/Capper, stainless steel for 6 and 7 mm OD tubes 222-3-50
Tube Scorer/Breaker, for 6 mm OD tubes; scores and breaks end tips off glass tubes leaving a clean, smooth opening and retains broken tip ends for safe disposal 810-722
Scoring file, for cleaning up tips P222318

 

Stainless Steel Tube Breaker/Capper

222-3-50

Tube Scorer/Breaker for 6mm OD Tubes

810-722

Scoring File for cleaning up tips

P222318

 

Tools

Description Part Number
Tool Kit, includes scissors, pliers, file, 2 slotted screwdrivers, 2, crosshead screwdrivers, forceps and charcoal pick 376-01-01
Charcoal Pick, used to dislodge/retrieve charcoal form a sorbent tube 222-3-20

 

Tool Kit for Sorbent Tubes

376-01-01

Charcoal-Pick

222-3-20

Quick Links

HOME

What is Air Sampling

Glossary

About Us

Product

Web Site Map

 

SKC Asia HSE Sampling Technologies Pte Ltd

2 Corporation Road

#05-09 Corporation Place, Singapore 618494

Tel:- +65 6271 0291

Fax:- +65 6271 0594

Sales general: sales@skc-asia.com

Accounts: accounts@skc-asia.com

Tech-support: techsupport@skc-asia.com

Join Our Mailing List


Name:*
E-mail:*
Anti spam